Magnum Model CFPS-700 Semi-Automatic Case Former & Pack Station

$6,880.00

In stock

Speed: Up to 15 Cases per Minute
Case Size Capacity 8-26” L, 6-20” W, 3”-unlimited H, 0-45 lbs STD; 0-75 lbs optional
Adjusts to different case sizes easily so you can pack a variety of products
No Electricity Required

Considering Financing or Leasing?

For purchases over $5,000.00, you may qualify for financing through our preferred lending solution American Packaging Capital, Inc. For more information, visit www.myampac.com/myampac or click the link below to apply.

Click here to fill out an application

Please note that we are not affiliated with American Packaging Capital, Inc. and any finance related questions should be directed to their offices.

In stock

Add to Wishlist

Category: Carton Erectors

Description

The Magnum 700 (shown with optional casters) is an adjustable semi-automatic carton forming machine and packing station. When an operator places an open, unfolded carton into the machine, all four bottom flaps are automatically folded in proper sequence and the carton is securely held in place for packing. The operator then fills and discharges the packed carton forward from the machine to any carton sealer for taping.
The primary benefit of the machine is the improved production through reduced operator repetitive movements. The machine folds the bottom flaps with the case right-side-up in only two seconds, saving a great amount of time over manually performing the same operation (the operator would otherwise have to flip the carton over, fold all four flaps by hand, then flip the carton right-side-up and place on a table for packing). The machine also combines the benefit of a packaging station which holds the carton in place, which allows the operator to remove their hands while filling the carton with up to 45# of product.

The Magnum 700 is easily adjustable for different case sizes. Turn the side crank handle to accommodate cases from 6” to 20” wide. The case length setting can be changed from 8” to 26” by simply sliding a rear stop into position and securing with a locking handle. No set-up changes are required to accommodate case heights from 3” to 24” or higher.

View the CFPS-700 PDF

Additional information

Weight	385 lbs
Dimensions	34 x 37 x 48 in
Brand	Highlight Industries
Product Type	Forming and pack station
Box Type	Random
Max Box Height	Unlimited
Max Box Length	26"
Max Box Width	20"
Min Box Height	3"
Min Box Length	8"
Min Box Width	6"
Optimal Throughput	8+ cases/min

Features

Simple and efficient operation allows cases to be formed as they are needed and triples operator efficiency
Interfaces with any Highlight carton sealer for flexibility and maximized productivity
Adjusts to different case sizes easily so you can pack a variety of products
Full pneumatic operation eliminates the need for electricity, sensors, and a PLC
Pre-opens major flaps then folds all flaps sequentially for reliable jam free operation
Erected cases are supported on rollers for smooth case ejecting
Three box contact points are used to start cycle, ensuring operator efficiency
Simple crank handle and locking knob adjustment provide quick size changeover
All pneumatic operation eliminates the need for electricity, sensors, and a PLC
Wedge rollers are engineered to hold the folded case securely for easy packing
Easily integrated with any Magnum Case Sealer
Construction: Heavy duty corrosion resistant steel construction Formed steel sheet metal covers
Hard wearing powder coated finish: Designed to minimize maintenance

Options

Locking Casters, set of 4. Replaces leveling feet. Includes shorter Leg Mounts to account for difference in height between feet & casters. Changes pass height range to 25” ~ 31”
Heavy Product Lift / Support Cylinder Upgrade. Allows packing of products up to 75 pounds
Pneumatic Case Eject Assembly. Pushes the packed carton from the machine into a carton sealer Simple operator push button control. Reduces operator strain. *Must specify right hand or left hand operation. *Minimum 5”H cases required to use this feature
Rear Top Minor Flap Folding Device to Pneumatic Case Eject Assembly*. Attaches to the Case Eject Assembly pusher arm. For use with a Magnum 2300 w/ 3 flap folding device and extended drive belts. Creates automatic 4 top flap folding as the case is ejected into the Magnum 2300 3-flap folder. *Maximum 20” L cases required to use this feature
Roller Lock Up Switch. Maintains the major flap supporting rollers in the horizontal position. Ideal for tray of OPF style cases
Tilting Frame Upgrade. Allows the Magnum 700 to tilt towards the operator for easier case loading. Ideal for tall, difficult to load cases or unstable products that cannot be loaded vertically. Press lever to tilt the machine for case loading and packing. Reverse the lever to upright the machine and discharge the case. *Must specify desired pass height (floor to bottom of case ht) and right hand or left hand operation
Heavy Duty Box Stand. Allows ergonomic access to case blanks for higher machine output. Holds ~50 case blanks (32 ECT)

Specifications

Specification	Measurement	Comments
Model	Magnum 700	Case Former & Packing Station
Type	Semi-Automatic
Tape Head	N/A
Tape Roll Diameter	N/A
Operating Rate	Up to 8+ boxes per minute	Depending on mode and operator speed
Case Belt Speed	N/A
Tape Roll Width	N/A
Case Minimum Length	8 inches
Case Maximum Length	26 inches	(20 inches with rear top minor flap folding option)
Case Minimum Width	6 inches
Case Maximum Width	20 inches
Case Minimum Height	3 inches	(5 inches with pneumatic case eject)
Case Maximum Height	Unlimited by machine	determined by what is reasonable for operator to pack
Case Minimum Weight	0 Pounds
Case Maximum Weight	75 Pounds
Electrical Power	N/A
Machine Length	36″
Machine Width	38”
Machine Height	Adjustable height from 23 to 32 inches
Machine Weight	385 pounds	On a pallet (base Model)
Air Requirements	80 PSI @ 3 SCFM
Entry and Exit Conveyor	N/A	Interfaces with carton sealer