Features
- Adjustable top and bottom wrap counters from 1-9
- Magnetic proximity switches in place of mechanical limit switches
- Cycle pause feature
- Top film over wrap control feature (TOC) Allows the operator to adjust the amount of film over wrap above the top of the pallet. This eliminates any slide or screwdriver adjustment of the photo eye.
- Electronic film tension adjustment control on the HMI
- Manual jog control for turntable
- Upgraded photo eye for automatic load height sensing
- Heavy-duty, welded steel construction (no plastic panels) designed for long life
- Environmentally friendly Powder Coated paint
- Variable turntable speed using 1/2 HP, 90VDC motor with ANSI 50 chain drive system
- Up to 15 RPM rotating table can deliver 25-40 loads per hour
- Allen Bradley Panel View 800 HMI
- Allen Bradley Micro 800 PLC
- Secure access to change wrap perimeters
- Fault code resolution
- Capability of storing 10 Wrap Recipes
- EZ-Load® film pre-stretch dispenser for 20 inch film rolls
- Dual anti-static film rollers with manufacturer’s lifetime warranty
- Film pre-stretch capability from 150% to 300% stretch factor (200% standard)
- Variable carriage speed up to 21 feet per minute
- Dancer bar variable corner compensation
- Allen-Bradley power, control, and safety components used throughout
- UL/CSA approved components
Options
- ACCESS RAMP (STANDARD): USED FOR HAND PALLET JACK LOADING TO LOW PROFILE MACHINES
- ACCESS RAMP (72” TURNTABLE): USED FOR HAND PALLET JACK LOADING TO LOW PROFILE MACHINES
- 48” RAMP EXTENSION (STANDARD): USED FOR ELECTRIC PALLET JACK LOADING TO LOW PROFILE MACHINES
- 48” RAMP EXTENSION (72” TURNTABLE): USED FOR ELECTRIC PALLET JACK LOADING TO LOW PROFILE MACHINES
- EXTENDED FILM TOWER: USED FOR WRAPPING TALLER LOADS EXCEEDING STANDARD MACHINE CAPABILITY. STANDARD MACHINE WRAPS UP TO 80” HIGH LOADS. REDUCE UPTO 3” FOR W-N-W MODELS
110” WRAP HEIGHT CAPACITY
- TURNTABLE UPGRADES: USED FOR SUCH APPLICATIONS WHERE A LARGER LOAD DIAGONAL IS REQUIRED.
- HIGH PROFILE (50 x 50, 4000LBS TURNTABLE STANDARD)
- 50 x 90 TURNTABLE, INCLUDES SPLIT FRAME
- UPGRADE TO 6000 LBS CAPACITY (HIGH PROFILE60” SQ. TURNTABLE)
- SPLIT FRAME CONSTRUCTION IF NOT INCLUDED (THIS FEATURE CAN BE APPLIED TO THE HIGH-PROFILE OPTIONS ABOVE)
- LOW PROFILE (60” ROUND, 4000LBS, TURNTABLE STANDARD)
- 60” ROUND TURNTABLE & 5000 LBS LOAD CAPACITY UPGRADE, INCLUDES SPLIT FRAME
- 72” ROUND TURNTABLE & 6000 LBS LOAD CAPACITY UPGRADE, INCLUDES SPLIT FRAME
- 90” ROUND TURNTABLE & 6000 LBS LOAD CAPACITY UPGRADE, INCLUDES SPLIT FRAME
- SPLIT FRAME CONSTRUCTION FOR STANDARD TURNTABLE
- 12” EXTENDED BASE FRAME USED FOR OVERSIZED PALLETS (USED FOR OVERSIZE LOADS, ONLY AVAILABLE ON SPLIT FRAME)
- SPLIT BASE OPTIONS
8FT CABLE BETWEEN TURNTABLE AND TOWER
12FT CABLE BETWEEN TURNTABLE AND TOWER
- AFTD (AUTOMATIC FILM TEAR DEVICE): THIS DEVICE AUTOMATICALLY TEARS FILM AT THE END OF THE CYCLE ELIMINATING SHARP OBJECTS FROM BEING USED BY OPERATORS TO CUT FILM
- WRAP-N-WEIGH: ADDS SCALE PCKAGE TO TURNTABLE, INCLUDES SPLIT BASE
- STANDARD 4 LOAD CELL WITH DIGITAL READOUT
- OPTIONAL PRINTER FOR LABELS WITH WEIGHT INFORMATION
- WRAP-N-WEIGH ACCESS RAMP (60” TURNTABLE): USED FOR HAND PALLET JACK LOADING TO LOW PROFILE WNW MACHINES
- WRAP-N-WEIGH ACCESS RAMP (72” TURNTABLE): USED FOR HAND PALLET JACK LOADING TO LOW PROFILE WNW MACHINES
- 48” WNW RAMP EXTENSION (60” TURNTABLE): USED FOR ELECTRIC PALLET JACK LOADING TO LOW PROFILE WNW MACHINES
- 48” WNW RAMP EXTENSION (72” TURNTABLE): USED FOR ELECTRIC PALLET JACK LOADING TO LOW PROFILE WNW MACHINES
- OPTIONAL INPUT VOLTAGES:
- 200 V – 230 V / 60 HZ
- 460 V – 480 V / 50 HZ
- MANUAL ROPING GUIDE (ADJUSTABLE): USED FOR TURNING FULL WEB INTO A ROPE OR BAND
- DARK READ EYE: USED FOR SENSING DARK OR REFLECTIVE LOADS
- COLD PACK: USED WHERE THE PALLET WRAPPER WILL BE EXPOSED TO TEMPS AS LOW AS 32 DEG FAHRENHEIT. Requires a Free-Standing Panel
- FREEZER PACK: USED WHERE THE PALLET WRAPPER WILL BE EXPOSED TO TEMPS FROM 31 TO -15 DEGREES FAHRENHEIT. Requires a Free-Standing Panel
- CONTROL PANEL OPTIONS
- NEMA 4: CONTROL CABINETS FOR MOIST ENVIRONMENTS. NOT WASHDOWN
- NEMA 12: CONTROL CABINET FOR DUSTY ENVIRONMENTS
- BOTH OPTIONS REQUIRE FREE STANDING PANEL
- TOP PLATEN(FREE STANDING):USED FOR TALL, LIGHT, OR UNSTABLE LOADS. THIS DEVICE APPLIES PRESSURE TO THE TOP OF THE SKID STABILIZING THE LOAD FOR ROTATION. STANDARD 24” DIAMETER PAD
- 110” Wrap Height Capacity
- 36” DIAMETER PAD UPGRADE
